|Work frequency ||125Khz/250khz. 375khz,500khz,625khz, 750khz, 875khz, 1000khz, 13.56mhz |
|Signal indication ||voice +LCD |
|Power supply || |
four dry batteries (7 alkaline batteries) or 5V USB power supply.
|Operating || |
|Power || |
120mA, power consumption, idle power consumption 50mA, sleep standby power 45uA. Read / write card operation power consumption of each card mode of different 100~150mA, playback voice when the peak current reached >150mA.
|Features || |
1.10 millions groups of Intelligent AI Cloud Keystores
2. Density Flow Detection, Break the firewall
3. Certificate to identity, support online Upgrade
4. Dual Channel Cloud Wifi Decoding
5. Automatic Card Formating
Introduction for Use
Copy a keycards:
Press "card" and enter the :smart cards page". The key card in the induction area, pree "read", the reader successfully. Replace the blank card to the induction area, press "write". Copied successfully.
Use iCmp decoding software copy IC card
The device is turned into the "disclaimer page", the Micro USB cable to connect the device with the PC. PC appears U disk, open U disk inside the iCopy decoding software, press "OK" to enter the main interface of the device. The IC card on the induction area, click on the Start decoding software. After decoding is successful, the replacement of a blank card to ideuction area, according to the "Write" success writing cards, copied successfully.