Handheld TM /ID card duplicator Touch Memory TM Card iButton Programmer
Home » Products » RFID Cards » TM ibutton » Handheld TM /ID card duplicator Touch Memory TM Card iButton Programmer
Share to:

Handheld TM /ID card duplicator Touch Memory TM Card iButton Programmer

Availability:
Quantity:
Product Description
Handheld TM /ID card duplicator Touch Memory TM Card iButton Programmer



High quality USB touch memory  ibutton programmer copy machine for ibutton


Product Description

Specification:

Item ibutton programmer
Material ABS plastic
size 100*60*20 mm
Working voltage put 9V battery packed cellor link with data cable with computer to supply power(for example:USB)
Read/Copy chip type

1)This copy machine supports to copy EM card (ID card) 125KHz, like EM4100.

2)  It can also copy EM4100 into EM4305 or T5577.
3)  It can copy TM card, iButton TM1990a, DS1990/RW1990 (DS1990A-F5, TM1990A-F5, DS1990R-F5, Cyfral key(cyfral, RW1, RW2000), Metakom key (DC2000) format.


Features


1)It can copy all the TM card , such as Access Card , District Card , Parking Card and so on

2)It is easy to operate, convenient , and just need three seconds to copy successfully.

Small size , with buckle , easy to carry , use batteries.

Operation instruction:

Firstly, turn on the switch at the side, put card A on the reader.One sound later,the indicator lights blue,then put the copy card on the reader,put away the card after one sound, then the copy card will successfully changed into card A(has 2 reader, TM card reader and ID card area).If you want to copy more than one card A, put all copy cards continuously on the reader. When you want to copy into card B, you should restart the machine,that is,turn off and then turn on again, the following proceduce is the same as stated above.


Pictures of products


Handheld TM /ID card duplicator Touch Memory TM Card iButton Programmer   Handheld TM /ID card duplicator Touch Memory TM Card iButton Programmer

Previous: 
Next: